Preparations for Pink and White Acrylic Nails
Begin your service by washing your hands and having the client wash and brush her nails with a clean, dry nylon nail brush. Dry the hands thoroughly. File and shape the natural nails with a 180-grit file, leaving the free edge flat or square so that the forms will seamlessly fit the underside of the free edge. With a very fine-grit buffer, remove the shine from the natural nails (taking extra care to avoid any damage to the natural nail); you can also use a fine diamond, round-tip e-file bit on a low speed, holding the bit flat.
2. Remove Dust From Nails
With a clean brush, remove the dust from the nails. Do not touch the nails with your fingers as your skin can deposit oils on the nails, leading to improper adhesion of product.
3. Apply Dehydrator
Once the dust is removed, apply dehydrator, which will remove any impurities left on the nails and dehydrate the nail plate. Using a sticky primer or a traditional acid-based primer for more adhesion, apply one coat of primer to all 10 nails (apply amply, but sparingly—do not let it flood the cuticles or sidewalls). Allow the primer to dry as you apply forms on the nails.
4.Decide on Reverse of Traditional Application
You can do a reverse or traditional application to create pink-and-white acrylics. For the traditional style, apply the white product first. Applying all the whites first keeps you focused on one technique and will allow you to go back and set the C-curve if needed. Your liquid monomer will become slightly milky as you work— another reason to do all the whites first, and then change out the liquid to apply the pink product. It’s best to apply the white powder for each tip in one ball; pick up a ball of white powder, flip the brush over and press out excess liquid on a clean spot of your table towel. (Releasing excess liquid gives you more control, without speeding up the set time.)
Once the pink has been applied, check the profile of each and every nail to make sure each apex is thick enough and located over the critical stress area. If you feel you need to add more product, do so with a clear powder so you don’t muddy the smile line.
8. Shape the Nail
Then, with a hand file or a medium-grit e-file bit, shape the surface of the nails, beveling the product near the cuticle to be flush with the natural nail. Again, check the profiles of all 10 nails.
9. Remove the Dust
Remove any dust from the nails. With a smooth buffer, repeat the filing steps: Shape the tips, sides and undersides of all 10 nails, then smooth the top surface. Remove the dust again and finish with a gel sealant for shin.
编辑注：Vicki Peters came into our offices to do this story only shortly before her death. We are so appreciative of getting to spend this great day with her, and grateful for everything she taught us over the course of her career.